Godox iT32 Firmware Update Stuck or Won’t Power On? Please Follow the Steps Below

How to Resolve Godox iT32 Firmware Update Issues

If your Godox iT32 shows any of the following after a firmware update:

  • Stuck on “Updating”

  • Will not power on after the update

  • No response when pressing the power button

Please stop any further attempts and follow the steps below to re-update the firmware.

Recommended Solution: Reinstall the Firmware

Step 1: Download the Latest Firmware Upgrade Tool

Download and install the latest version of the Godox firmware upgrade tool from:

https://www.godox.com/firmware-launcher-installers/

Step 2: Download the Latest Firmware for Your Camera Version

Go to the page below and download the latest iT32 firmware that matches your camera system
(e.g. Sony / Canon / Nikon / Fuji / OM System):

https://www.godox.com/firmware-flash/

⚠️ Make sure the firmware version exactly matches your camera mount/model.

Step 3: Re-update the Firmware

  1. Launch the firmware upgrade tool

  2. Connect the iT32 to your computer using a USB cable

  3. Load the downloaded firmware file

  4. Follow the on-screen instructions to complete the update

  5. Do not disconnect the device, power off, or close the program during the process

After the update is completed, the device should power on and operate normally.

Important Notes

  • Ensure stable power during the update

  • Do not unplug the USB cable while updating

  • Avoid running other heavy programs during the process

  • Disconnect the device only after the update is fully completed

Godox iT32 Firmware Update Stuck or Won’t Power On? Please Follow the Steps Below

If the iT32 firmware update gets stuck or the device will not power on, reinstalling the latest firmware using the newest upgrade tool and the correct camera-specific firmware can resolve the issue. This guide provides clear, step-by-step instructions.

 

Leave a comment